• National pipe threads in accordance with ANSI/ASME B1.20.1
  • Fittings are right-hand threaded
  • The fittings have a general conformance with dimensional standard MIL-DTL-52618-E
  • Fittings are random tested at 120 pounds of air pressure under water, for a normal surface condition rating of 150 pounds of pressure
  • Individual fittings are not marked with alloy or pressure data
  • Fittings are not anodized

Dimensions available upon request

Please contact us for pricing information
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

Item#

Material

Size

Threads/Inch

Drill

1/2" Lateral, 45º N/A 356-F N/A 1/2 in N/A 14 N/A 23/32"
(0.719")
3/4" Lateral, 45º N/A 356-F N/A 3/4 in N/A 14 N/A 59/64"
(0.922")
1" Lateral, 45º N/A 356-F N/A 1 in N/A 11-1/2 N/A 1-5/32"
(1.156")
1-1/4" Lateral, 45º N/A 356-F N/A 1-1/4 in N/A 11-1/2 N/A 1-1/2"
(1.5")
1-1/2" Lateral, 45º N/A 356-F N/A 1-1/2 in N/A 11-1/2 N/A 1-47/64"
(1.734")
2" Lateral, 45º N/A 356-F N/A 2 in N/A 11-1/2 N/A 2-7/32"
(2.219")
2-1/2" Lateral, 45º N/A 356-F N/A 2-1/2 in N/A 8 N/A 2-5/8"
(2.625")
3" Lateral, 45º N/A 356-F N/A 3 in N/A 8 N/A 3-1/4"
(3.25")
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1